Digital Voice Radio Modes

http://xlx.rickjpage.com

There are a total of ten modules on reflector XLX188.  They are labeled and self explanatory.  Please respect the Private 1:1 rooms.   When you complete a 1:1 qso, please disconnect from the module.

For CPU load, please limit transcoding to modules A and B

https://wireless2.fcc.gov/UlsEntry/licManager/login.jsp

https://radioid.net/register

https://brandmeister.network/?page=register

Please note, to run a Pi-Star or similar pocket repeater, you will also need to create a separate password for the device. So an ID/password for your account.  And a password for the pi-star to authenticate against Brandmeister when it connects to a BM talk group.  

https://www.dmrfordummies.com/dmr-radio-id/

If you intend to use you C4FM radio as a node you will need to register your radio with Yaesu. This is not necessary if the intended purpose is Reflectors (e.g. XLX188) rather  than Yaesu sanctioned Rooms (eroom 02428).

https://www.yaesu.com/jp/en/wires-x/index.php  - Registration

https://www.yaesu.com/jp/en/wires-x/id/active_room.php  -  Active rooms

https://www.yaesu.com/jp/en/wires-x/id/active_node.php  -   Active nodes

http://c4fm.xyz/c4fm-map.php  -  Interactive map of nodes/rooms/repeaters

Reflector XLX188 is configured to default C4FM users into module A.  If necessary, you can use your radios Wires-X feature to change modules.

Radio/MMDVM Host: enable YSF mode

Yaesu System Fusion Configuration/YSF Startup Host: Host=YSF00118   XLX188

UPPER Case Host File needs to be enabled for FT70 radios

Radio/MMDVM Host = enable D-Star mode

On your radio, in DR mode, simply link to reflector REF188A. Once linked, change to Use Reflector.  

To change modules, unlink and link to new module using steps outlined above.

To connect to ICOM trust reflectors (number 001-099) you must register.  Pls see link below for registering:

 https://regist.dstargateway.org/Dstar.do